are mandatory to carry on any kind of construction work during your project. All of these construction tools are necessary to fulfill a good outcome in the whole project.
In this article, you will get a list for building construction works such as concrete, brickwork, leveling, woodworks, floor works, slab works, carpentering, plastering, etc.
To prevent an unexpected hazard the laborers should use these tools with proper safety at the working site.
Bolster
The bolster is like chisel however it's accustomed cut bricks. Its leading-edge is wider than the dimension of brick. it's helpful for correct cutting of bricks.
 |
| bolster |
Read more about; 05 type of measuring tape
Boning Rods
Boning rods square measure made from wood and that they square measure T form. they're accustomed level the excavated trench throughout its length. Minimum 3 boning rods square measure accustomed level the ditch surface.
 |
| boning rods |
Brick Hammer
Brick hammer is employed to chop the bricks and conjointly accustomed push the bricks if they are available out of the course line.
Bump Cutter
Bump cutter is employed to level the concrete surfaces like concrete floors, foundations etc. it's conjointly known as a screed.
Chain Lewis and Pin Lewis
Chain lewis and pin lewis square measure 2 completely different tools that square measure accustomed elevate significant stones particularly within the construction of stone masonry.
Chisel
Chisel is usually utilized in woodwork and this should be helpful to get rid of the concrete bumps or excess concrete in the hardened surfaces.
Circular Saw
Circular saw accustomed cut the wood boards, frames etc. it's used once correct cutting is needed in less time. it's safer than hand saw.
Read more about; Methods of the bill of quantities
Concrete Mixer
A concrete mixer is a machine that mixes the ingredients water, fine mixture, coarse mixture and cement to deliver the superbly mixed concrete.
Crowbar
Crowbar is employed for creating by removal the bottom and to get rid of the roots of trees within the ground, nails, etc.
Digging Bar
Digging bar is solid metal rod with pin form at the lowest. it's conjointly accustomed dig the onerous surfaces of ground.
Drill Machine
Drill machine is employed to create holes within the walls, slabs, doors, window frames etc.
End Frames
Their use is analogous to the road and pins. however rather than pins, L formed frames square measure used at the tip of thread that hold the brickwork effectively and levels the alignment accurately.
Float
Float is created of wood that is employed to smoothen the plastered concrete surface. It contains handle on its high and sleek picket surface on its bottom.
Gloves
Gloves square measure needed to stop the hands from direct contact with cement, paints, etc. and to avoid injury whereas exploitation machines, tools, etc.
Hand Saw
Hand saw is employed to chop the wood materials like doors, windows, block panels etc.
Head Pan
Head pan is created of iron that is employed to elevate the excavated soil or cement or concrete to the operating web site etc. it's a lot of normally utilized in construction sites.
Hoe
Hoe is additionally accustomed excavate the soil however during this case the metal plate is supplied with oblique angle to the picket handle.
Jack Plane
Jack plane is employed within the wood work to smoothen the surface of doors and windows etc.
Ladder
The ladder is additionally needed in construction works. to visualize blockwork, to move material to the upper floors, to color the walls etc.
Line and Pins
Line and pins consists a thread whose ends square measure connected with 2 solid metal rods with pin points. it's accustomed level the alignment of the brick course whereas brick birth.
Mason’s sq.
Mason’s sq. is employed to realize good right angle at the corner of masonry wall. it's “L” form. 1st course is set properly exploitation Mason’s sq. then supported the primary, remaining layers of bricks square measure started out.
Measuring Box
Measuring box is employed to live the amount of sand and mixture used for creating concrete. it's of mounted dimensions therefore, mixture needn't to be weighted for each time. the final dimensions of a measurement box square measure 300mm X 300mm X 400mm (length x dimension x depth).
The volume of measurement box is usually one isometric Feet, that makes it straightforward to live concrete quantitative relation or mortar quantitative relation.
Measuring Tape
Measuring tape is employed to visualize the thickness, length, widths of masonry walls, foundation beds, excavated trenches etc.
Measuring Wheel
Measuring wheel is employed to live the distances or lengths. It contains a wheel of far-famed diameter, that record the no.of complete revolutions from that the gap may be measured. It makes the work easier.
Pick Axe
Pick axe is employed to excavate the soil. it's a lot of appropriate for onerous soil that is kind of troublesome to dig with spade or hoe.
Plumb Bob
Plumb bob is employed to visualize the position of structures. It contains a solid metal bob connected to the tip of a thread. it's conjointly used hotel measuring to level the instrument position.
Plumb Rule
Plumb rule is employed to visualize the vertical line of wall whether or not it's good vertical or not. It contains a straight wood board with uniform edges. On its center a groove is provided within which bob is placed. once the rule is placed vertically with the wall the bob ought to be within the groove line otherwise the wall won't be vertical.
Polisher
Polisher is employed to smoothen the surface of tiles, wood works etc. The smoothening makes them shine and therefore the method is termed sprucing.
Putty Knife
Putty knife is employed level the putty ending and conjointly accustomed cut back the thickness of finish once it's a lot of thick.
Earth ram
After the excavation of ground, the lower surface is also uneven. To level the surface earth ram is employed. It contains massive sq. formed block at its finish with that the bottom is leveled.
Rubber Boots
During construction works, legs might harm thanks to contact with chemical materials like cement or physical accidents. So, for safety rubber shoes square measure needed.
Safety Glasses
To prevent the eyes from mud, chemical actions of materials etc. safety glasses ought to be maintained.
Safety Helmet
The safety helmet ought to be necessary in construction works. Any material or structure might fall from height throughout construction work. So, to safeguard the top from injury or any accident, this safety helmet ought to be used.
Sand Screen Machine
The fine mixture utilized in concrete shouldn't contain impurities or coarse particles. The sand screen machine is employed to screen the sand or fine mixture before combining it with concrete. This screen is additionally used for screening fine sand for application work.
Scratchers
Plastering of a surface is disbursed layer wise. Minimum a pair of coats square measure necessary for application. to supply the nice bond between the coats, bottom layer is damaged with a tool known as scratchers.
Sledge Hammer
Sledge hammer is employed once the bottom is difficult and contains rock layers. an outsized weighted metal head is provided at the picket handle with that onerous layers may be cracked, that makes straightforward for creating by removal.
Spade
Spade is employed to dig the soil for foundation trenches etc. It contains metal plate at the tip of long picket handle.
Spirit Level
Spirit level is created of wood or onerous plastic with bubble tube within the middle. The bubble tube is crammed with alcohol partly. So, the bubble is created in it.
Spirit level is employed in brick masonry to visualize the amount of the surface. The level is placed on the surface and the bubble is checked. The surface is leveled once the bubble within the tube settles at the middle of the tube.
construction tools
Straight Edge Brushes
Straight edge brushes square measure accustomed offer finishing to the plastered surface particularly at corners and edges of walls.
Tile Cutter
Tile cutter is employed to chop the tiles. Sometimes, traditional tile size is larger than needed at the corners wherever floor meets the enclose that case cutlery is beneficial.
Masonry Trowel
Trowel is employed to elevate and apply the cement mortar in little quantities. it's made from steel and picket handle is provided for holding. The ends of trowel is also pointed or bull snub-nosed.
 |
| masonry trowel |
Scraper Putty Knife
Scraper putty knife is used to apply the putty layer on the new plaster surface of the interior wall. There are various shapes/ sizes are available in the marketplace. Normally, these kinds of knife made by stainless steel with wood/ plastic handle.
 |
| scraper putty knife |
Read more about; The basic concept of construction risk management
Vibrator
Vibrator is employed to compact the concrete by this the air gaps square measure crammed with water and workability varies while not adding water to that.
 |
| concrete vibrator |
Wedge
Wedge may be a little onerous metal blade that is employed to chop the rock surfaces with the assistance of sledgehammer.
Wheel Barrow
The wheelbarrow is used to move bulk weights of materials like cement, sand, concrete combine etc. it contains one or 2 wheels at its front and 2 handles at its back that square measure accustomed push the wheelbarrow.
 |
| wheel barrow |
Read more about; Who is a quantity surveyor?
No comments:
Post a Comment